Line 6 Pod Express Bass Effects Pedals
POD® Express Bass is an ultra-portable bass amp and effects processor that enables bassists to take their tones wherever they choose. Simple controls make it easy to use, while models derived from the HX® family of processors ensure exceptional sound quality and authentic feel. POD Express Bass gives bassists seven amps, seven cabs, and 17 distortion, compression, synth, modulation, and delay effects-including a looper-and it may be powered by three AA batteries (included) or an optional 9-volt power supply.
LED Ring
Seven multi-color LED segments light to indicate various parameter functions. A red LED indicates the selected amp model when turning the AMP encoder. When holding the ALT button and turning the AMP encoder or an effect knob, the LED segments indicate the corresponding value. When turning an effect knob, the LED segments (1-7) indicate the level of the currently selected effect.
AMP Encoder
Turn to select an amp (or turn to the detent at the 6 o'clock position for no amp). A matching speaker cab is also loaded. Press and hold the AMP encoder to save the current settings as a preset.
Effects Knobs
These select specific effects within each of the four effect categories. Turning them entirely counterclockwise bypasses the selected effect.
ALT Button
Press to access the alternate control functions (GAIN, MID, BASS, etc.). Hold to adjust the corresponding alternate parameters.
ON Footswitch and LED
Press to enable or bypass the device. The LED lights white when enabled.
TAP Footswitch and LED
Tap this footswitch in time with the music to set the tempo of delay and modulation effects, indicated by the flashing red LED. Press and hold to engage the Tuner.
Preset Mode Switching
Press and hold the ON and TAP footswitches simultaneously to enter Preset Mode. Then, scroll up or down through the 21 preset locations using the footswitches. All 21 preset locations may be overwritten by user presets.
Model: | AAF6732 |
Manufacturer: | Line6 |