Darkglass Vintage Microtubes

The Microtubes Vintage is our tribute to some of the most legendary sounds in rock history. It provides warm tube-like tones with a natural dynamic response that echoes the organic compression of old tube amps and reel-to-reel tape machines.

Specs

Drive
Sets the amount of saturation in the overdriven signal.



Blend
Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.



Era
Interacts with the Drive knob to shape the character of the pedal. Dial it down to get the warm midrange tones of the 70s or crank it up to get the punchy metallic tones of 80s and 90s rock.

Level
Sets the volume of the overdriven signal.

Output
Connect from the ¼” Output jack to the input of your amplifier or another effects pedal.

Input
Connect your instrument or output from your pedal board to the ¼” mono jack.

9V DC
Only use a regulated 9V DC adapter with a center-negative plug.

Dimensions
Width: 75 mm / 3″
Length: 111 mm/ 4¼″
Height: 43 mm / 1¾″
Weight: 250 g / 0.55 lb



Warning
The Vintage Microtubes has a current draw of 20mA. Only use a regulated 9V DC adapter with a center-negative plug.

Unregulated power supplies and/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.